2 stand ranges
Conveyor stands, built around belt access.
Aluminum and steel stands with adjustable heights and mounting options, designed so the belt can come off in minutes.
Stand choice brings together belt height, conveyor support and access for belt changes and adjustments. Mounted on our open stand design, AccuVision, End-Drive, Center Drive, Cleated and Flex-Side conveyors allow a two-minute belt change.
Aluminum or steel
Two materials, one open design.
Both ranges adjust around the specified belt height, take optional casters and carry the same 10-year warranty.
- Aluminum stands
Aluminum
Aluminum stands
Anodized aluminum supports with adjustable height and a wide choice of bases, feet and mounting styles.
Used forClean, light-duty lines and layouts needing custom bases or stabilizing feet.
View aluminum stands → - Steel stands
Steel
Steel stands
Powder-coated steel supports with height-adjustable legs, for level or inclined conveyors, floor-mounted or on casters.
Used forFloor-mounted or mobile lines, including inclined conveyors.
View steel stands →
Side by side
Fasteners refer to the documented support-stand design.
| Aluminum | Steel | |
|---|---|---|
| Construction | Anodized aluminum | Powder-coated steel |
| Height | Adjustable ±2 in; custom heights | Adjustable legs ±2 in; custom heights |
| Mobility | Optional casters | Optional casters |
| Mounting | Custom bases and mounting styles; stabilizing feet | Floor-mount plates or casters |
| Fasteners | Metric | U.S. |
| Warranty | 10 years | 10 years |
Shared stands and belt access
Support that keeps the conveyor serviceable.
Stand and brace positions are planned around the belt, drive and guides, not just the load.
Open stand design
Mounted on our open stand design, AccuVision, End-Drive, Center Drive, Cleated and Flex-Side conveyors allow a two-minute belt change. The open side gives the access to remove the belt.
Mount several conveyors
Shared stands support several conveyors together. We coordinate their positions, combined load, transfers and access around each one.
Access for drives and guides
Stand and brace positions keep room for the drive, side guides and belt-removal path, and for the wider machine envelope.
Height and mounting
Set to the belt, adjusted around it.
Load capacity and support spacing depend on the complete assembly; the stand and mounting drawing for your conveyor confirm the details.
- Warranty
- 10 years
- Height adjustment
- ±2 in (51 mm) around the specified belt height, on the documented support-stand design
- Preset height stops
- Set the next height before loosening the fasteners that hold the conveyor; adjustment follows the equipment instructions
- Casters and braces
- Fixed and swivel casters. A horizontal brace ties two stands together when they aren’t floor-bolted or when casters are fitted
- Incline mounting
- Stand-base mounts adjust for inclines; not recommended for conveyors over 6 ft (1829 mm) unless the tail end is supported. The mount is separate from the stand
- Custom options
- Custom heights, mounting styles and bases; aluminum options include stabilizing feet and different base plates
Existing conveyors
A new stand for an installed conveyor?
The conveyor identifier and the current belt height help us match a stand, or plan a new mounting arrangement.